Click here for Pontiac valve adjustment

NEW HEAVY DUTY FULL ROLLER ROCKER ARMS

Scorpion rocker arms are available in various ratio's, are as good or better then the best rocker arms and are priced even better. The units are made in the USA, beware of foreign made rockers out there. The Scorpion rockers include poly locks that have .600 bodies and do not need to be necked down to clear the trunion (like many other rockers). The trunion is also polished - giving the needle bearings a smoother gliding action - allowing a longer life for your Pontiac engine. They can have spring pressures higher then 800 lbs and there is plenty of spring/retainer clearance. As always, we are using these rockers, not just selling them. The 1.65 ratio rockers, in our Spotts Performance blown injected dragster, have performed flawlessly in the last 2 years. There was no loss in valve lash (no adjustments were necessary). All the Scorpion rockers will also fit certain applications without elongating the pushrod holes, were other rockers will not.
SCA15 Scorpion rocker arm set 1.5 ratio $245.00
SCA16 Scorpion rocker arm set 1.6 ratio $225.00
SCA165 Scorpion rocker arm set 1.65 ratio $245.00
SCA172 Scorpion rocker arm set 1.72ratio $239.00
SCA16172 Scorpion rocker arm set 2 half sets of 1.6 and 1.72 $239.00
All Scorpion rocker sets come with the highest quality hardened 7/16 poly locks.


Comp Cams Rocker Arms
1044-16 Comp Cams Aluminum Roller Rocker Arms - Stud Mount, Full Roller, Aluminum, 1/ 6 Ratio, Fits 7/ 16 in. Stud, AMC/ Ford/ Oldsmobile $299.00
1049-16 Comp Cams Rockers Aluminum Roller Ford 289-351W 7/ 16" 1.7 $299.00
1060-16 Comp Cams Aluminum Roller Rocker Arms - Stud Mount, Full Roller, Aluminum, 1.5 Ratio, Fits 7/ 16 in. Stud, Pontiac, Set of 16 $369.00
1061-16 Comp Cams Aluminum Roller Rocker Arms - Stud Mount, Full Roller, Aluminum, 1.65 Ratio, Fits 7/ 16 in. Stud, Pontiac, Set of 16 $369.00
1451-16 Comp Cams roller tip rocker arms 1.52 ratio $164.00
1452-16 Comp Cams roller tip rocker arms 1.65 ratio $164.00
COMP CAM roller tip rockers do not include poly locks like the Scorpion rockers. The Comp roller tip rockers include lock nuts (3/8" thread) and are not recommended by Spotts Performance. With the addition of poly locks, The Scorpion full roller rockers are the better bargain.

#RASS1

CROWER rocker arm shaft set - specify heads, ratio's and offset

$1,289.00


Related parts

FAQ
Q - I am thinking about using the Scorpion 1.5 Roller Rockers on my 400. Has anyone installed these and kept the stock 400 Chrome Valve covers? I want to keep my original appearance, so I don't want to have to use an aftermarket Valve Cover.
A - I use the Scorpions all the time with stock valve covers. I use them with ARP 7/16 rocker studs (#RAS4) and I have to use the 5/16 valve cover gaskets (#VCG1) to clear the polylocks.